Menu
Your Cart

2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module

2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
$1.76
Ex Tax: $1.76
  • Stock: In Stock
  • Model: EB000330
  • SKU: EB000330
Features:

XH-NF-01 is a 100 mW power 2.4G wireless module, high airspeed (up to 2 Mbps), using SPI interface, transceiver and receiver integrated hardware module; high stability, high-cost performance, good spectrum testing characteristics, small size, using all-industry-class components.
XH-NF-01 can be widely used in various occasions of the Internet of Things, such as a wireless key mouse, wireless remote control, somatosensory devices, active RFID, NFC, low-power wireless sensor network nodes in ad hoc networks, etc. It is an ideal solution for the application of the Internet of Things.
XH-NF-01 is packaged in DIP-8. Whether it is learning or mass production, XH-NF-01 can be quickly connected to existing products without welding and directly plugged in. It is very convenient to use.
DIP-8 ultra-small size package, built-in 2.4G antenna, compact size, easy to use.
Supports six-channel data reception.
Support general modulation methods such as GFSK/FSK.
Support 2Mbps/1Mbps/250Kbps data rate.
With a four-wire SPI interface, the speed can reach 10MHz.
Internal Intelligent ARQ Baseband Protocol Engine.
Hardware interrupt output of receiving and receiving data.
Support 1-bit RSSI output.
 
 
Num. Pin Direction Function
1 VCC - The power supply must be between 2.0 - 3.6V
2 GND - The ground wire, connected to the power reference ground
3 CSN Input The chip select pin for starting an SPI communication
4 CE Input Control pin
5 MOSI Input SPI data input pin
6 SCK Input SPI bus clock
7 IRQ Output Interrupt signal output, active low
8 MISO Output SPI data output pin
 
Model XH-NF-01
Package DIP-8
Size 28.6*15.3*3.2 mm
Communication Interface SPI (up to 10Mbps)
Airspeed rate 250k~2Mbps 3 levels adjustable (250kbps, 1Mbps, 2Mbps)
Spectrum range 2400MHz~2525MHz adjustable, 1MHz stepping
Antenna form Onboard PCB antenna, gain 2dBi
Maximum transmit power 7dBm
Receiving sensitivity [email protected]
Average current Emission current: 25mA (7dBm)
Receive current: 15mA (2Mbps)
Shutdown current 1.0uA (Shutdown mode)
Power supply range 2.0V~3.6V, typical value 3.3V
Operating temperature -20 ℃ ~ 85 ℃
Storage environment -20 ℃ ~ 90 ℃ , < 90%RH
 
Package included:

1 x 2.4G Wireless Module XH-NF-01


24G-Wireless-Module-XH-NF-01-Built-in-Antenna-100mW-Power-SPI-Interface-Internet-Module-1421724

24G-Wireless-Module-XH-NF-01-Built-in-Antenna-100mW-Power-SPI-Interface-Internet-Module-1421724

Write a review

Note: HTML is not translated!
Bad Good

Shipping Time


After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

img

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details. 


Shipping Rates


You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:


Shipping MethodShipping RatesShipping Times
Flat Shipping (Promotion)
$10About 5-30 Working Days to Worldwide (Only include Monday to Saturday )

Standard Express(0.5KG starting price listed)

Based On WeightsAbout 5-15 Working Days to Worldwide (Only include Monday to Saturday )

Priority Express (0.5KG starting price listed)

Based On WeightsAbout 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible. 

If you want to know more information, please contact the customer service by contact form or [email protected] We will settle your problem as soon as possible. Enjoy shopping!