Automobile Vehicle Signal Simulator Generator Car Hall Sensor and Crankshaft Position Sensor Signal Tester Meter 2Hz to 8KHz

Based on 0 reviews. - Write a review

$28.99

Ex Tax: $28.99

Stock: In Stock
Model: EB004722
SKU: EB004722

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Features:

Main Functions

-Crankshaft position sensor signal simulation output: including 9 types of gear missing teeth signal: 58+2, 58+1, 57+2, 57+1, 37+1, 36+2, 35+1, 34+2, 22+1.

- One type of standard 60+0 signal simulation output.

-Magnetoelectric signal or Hall signal output.

-Use 60+0 signal to simulate vehicle speed sensor signal output.

- Use 60+0 signal to drive odometer or test odometer.

- ABS sensor, optical sensor signal simulation.

Output Parameters

-All types of signal have been embedded inside the signal generator, and can be displayed in LED screen for selection reference, no need to download software.

-One button switch between magnetoelectric signal and Hall signal, convenient to use.

-9 ranges of frequency selection, accurate frequency output.

-01 refers to 2Hz-1KHz frequency range.

-02 refers to 2Hz-2KHz frequency range.

-03 refers to 2Hz-3KHz frequency range.

-04 refers to 2Hz-4KHz frequency range.

-05 refers to 2Hz-5KHz frequency range.

-06 refers to 2Hz-6KHz frequency range.

-07 refers to 2Hz-7KHz frequency range.

-08 refers to 2Hz-8KHz frequency range.

-09 refers to 2Hz-100Hz frequency range.

-When the signal generator output is higher than 2HZ, press SET button, it can output 10 types of signal, 60-0 represents standard magnetoelectric or Hall signal output, the other 9 types of signal are magnetoelectric or Hall gear missing teeth signal (Crankshaft position sensor signal).

Output Signal Type Switching:

-RED Button Function: Magnetoelectric signal and Hall signal switching button.

-Press down the button: it outputs magnetoelectic signal.

-Release the button: it outputs Hall signal.

- For some generators, when press down the red button, it outputs Hall signal, release button, outputs magnetoelectric signal.

-User can use multimeter to check output signal type. Use multimeter (20V measurement) to test the signal generator output, it output is about 5.8V, its output is Hall signal, if output is 0V, the output signal type is Magnetoelectric signal.

About Operating Power Supply Input:

-The operating power supply of that signal generator is 12VDC, user can use the 12V power supply for the Battery of the car, or user any other 12V regulated switching power supply or AC/DC power adapter.

About Signal Output GND

-If use Hall signal output, signal output GND and the operating power supply GND are in common ground, if use the 12V operating power supply from the battery of the car, user only needs to connect Signal output positive wire.

- If use magnetoelectric signal output, signal output GND and the operating power supply GND are NOT in common ground, user must correctly connect both the output signal positive wire and output signal negative GND wire, thus the signal generator can operate normally.

Package includes:

1 x Original auto vehicle signal generator

1 x Testing Clip

1 x English User Manual

Details Pictures:

Automobile-Vehicle-Signal-Simulator-Generator-Car-Hall-Sensor-and-Crankshaft-Position-Sensor-Signal--1625013

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!

Tags: Signal Generator