- Automobiles & Motorcycles
-
Circuit Modules & Development Board
- Circuit Modules
-
Module Board
- Amplifier Board
- Battery Protection Module
- Board & Shield
- Converter Board
- Display Screen
- Driver Module
- Motherboard & Development Board
- Motor PWM Speed Controller
- Other Module Board
- Power Supply Module
- Raspberry Pi & Orange Pi
- Relay Module
- RF amplifier
- Sensor & Detector Module
- Smart Module
- Test & Measuring Module
- ZVS Heating Module
- Computer & Networking
- Electronic Components
- Festival Gifts & Party Supplies
- Lights & Lighting
- Media & Security
- Mobile Phone Accessories
- Tools & Excipients
Your shopping cart is empty!
- Best sellers
- New Arrivals
Driver Module
4 2 Special Motor Driver Board TB6612 Dual DC 1CH Stepper Module
> Feature: The motor shields provide a convenient way of powering your OpenMV Cam and controlling low-power motors in one package. It features a 5V linear regulator to power your OpenMV Cam from a battery along with a motor driver chip to power two less than 2A low-power motors from the same battery. The motor driver chip has 2 pins per m..
10 Pcs L298N Dual H Bridge Stepper Motor Driver Board
> Description: Double H bridge drive Chip: L298N (ST NEW) Logical voltage: 5V Drive voltage: 5V-35V Logical current: 0mA-36mA Drive current: 2A (MAX single bridge) Storage temperature: -20 to +135 Max power: 25W Weight: 30g Size: 43 x 43 x 27mm Note: This module has a ..
10pcs 15-24W LED Driver Input AC90-265V to DC45-82V Built-in Drive Power Supply Adjustable Lighting for DIY LED Lamps
> Specifications: Input voltage: AC90-265V Output voltage: DC45-82V Output current: 280-300mA(adjustable) Product size: 50*20*15mm Working temperature: Ta: 50 TC: 75 Efficiency: ≥87% Power factor: 0.6 Product application: spotlight PAR light / bulb light / candle light / etc. Package Included: 10 x..
10pcs 3W 5-35V LED Driver 700mA PWM Dimming DC to DC Step-down Module Constant Current Dimmer Controller
> Specifications: Input :DC 5-35V Output: 700mA ± 20mA Drive 1-10 pcs 3W LED Supports PWM dimming High level turn off the output Low level Open the output LED buck mode to ensure the total total voltage difference is lower than the input supply voltage (2-3V) . Ultra-small size design (length 3.6cm * Width 2cm) ..
10pcs 4W 5W 6W 4-6W LED Driver Input AC 85-265V to DC 12V-24V Built-in Drive Power Supply Lighting for DIY LED Lamps
> Specifications: Input voltage: AC 85-265V Output voltage: DC12-24V Output current: 280-300mA(adjustable) Product size: 20*18*12mm Working temperature: Ta: 50 TC: 75 Efficiency: ≥87% Power factor: 0.6 Product application: spotlight PAR light / bulb light / candle light / etc. Package Included: 10 ..
10pcs 5W LED Driver Input AC110/220V to DC 15-18V Built-in Drive Power Supply Adjustable Lighting for DIY LED Lamps
> Specifications: Input voltage: AC110V-220V Output voltage: DC 21V-45V Output current: 280-300mA(adjustable) Product size: 27*17*9mm Working temperature: Ta: 50 TC: 75 Efficiency: ≥87% Power factor: 0.9 Product application: spotlight PAR light / bulb light / candle light / etc. Package Included: 1..
10pcs 6W 7W LED Non Isolated Modulation Light External Driver Power Supply AC110/220V Constant Current Thyristor Dimming Module
> Specifications: Input voltage: AC90-265V Output voltage: DC18-24V Output current: 280-300mA(adjustable) Product size: 68*33*22mm Working temperature: Ta: 50 TC: 75 Efficiency: ≥90% Power factor: 0.9 Product application: spotlight PAR light / bulb light / candle light / etc. Package Included: 10 x..
10pcs 7-15x3W LED Driver Input AC110V-220V to DC 21V-45V Built-in Drive Power Supply Adjustable Lighting for DIY LED Lamps
> Specifications: Input voltage: AC110V-220V Output voltage: DC 21V-45V Output current: 450-580mA(adjustable) Product size: 53*36*16mm Working temperature: Ta: 50 TC: 75 Efficiency: ≥87% Power factor: 0.65 Product application: spotlight PAR light / bulb light / candle light / etc. Package Included: ..
10pcs 7W 9W 12W 15W 7-15W LED Driver Input AC 85-265V Power Supply Built-in Drive Power Supply 260-280mA Lighting for DIY LED Lamps
> Specifications: Input voltage: AC 85-265V Output voltage: DC21-54V Output current: 260-280m(adjustable) Product size: 43*18*21mm Working temperature: Ta: 50 TC: 75 Efficiency: ≥87% Power factor: 0.6 Product application: spotlight PAR light / bulb light / candle light / etc. Package Included: 10 x..
10pcs 7W 9W 12W 15W LED Non Isolated Modulation Light External Driver Power Supply AC90-265V Constant Current Thyristor Dimming Module
> Specifications: Input voltage: AC90-265V Output voltage: DC21-48V Output current: 300mA(adjustable) Product size: 68*34*22mm Working temperature: Ta: 50 TC: 75 Efficiency: ≥80% Power factor: 0.6 Product application: spotlight PAR light / bulb light / candle light / etc. Package Included: 10 x 7W 9W..
10pcs 7x2W 12x2W LED Driver Input AC 85-277V to DC 12V-42V Built-in Drive Power Supply Lighting for DIY LED Lamps
> Specifications: Input voltage: AC 85-265V Output voltage: DC12-24V Output current: 300mA Product size: 48*20*13mm Working temperature: Ta: 50 TC: 75 Efficiency: ≥87% Power factor: 0.6 Product application: spotlight PAR light / bulb light / candle light / etc. Package Included: 10 x 7x2W 12x2W LED D..
10pcs BGA152 BGA132 BGA136 TSOP48 NAND Flash USB 3.0 U Disk PCB IS917 Main Controller Without Flash Memory for Recycle SSD Flash Chips
> Please download software here: IS917 Specifications: Main Controller IC : IS917 USB type: USB3.0 PCB size:14*33mm(without the USB port size) Support IC: BGA152/132/136 TOP48 (two solder chips,every chips need 2CE.But if you weld one chip in PCB,MAX 4CE) Usage:(USB3.0 interface High speed) NAND flash R/W Strick Can be delete all par..
10Pcs DC 5V 4 Phase 5 Wire Stepper Motor With ULN2003 Driver Board
> 10Pcs DC 5V 4 Phase 5 Wire Stepper Motor With ULN2003 Driver BoardDescription: This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board 5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug, easy to use stepper motor used in the development b..
10pcs DC Motor Driver Board 2 Way DRV8833 Motor Drive Module DC 3-10V
> Parameters: Size: 18.5 x 16 mm Input voltage: 3-10V Single H bridge output current: 1.5A, can drive 2 dc deceleration motors. Built-in overcurrent protection, short circuit protection, undervoltage latching and overheating protection. Sleep mode with low power consumption. Purpose: drive dc motor and 4-wire stepping mot..
10pcs Dual Channel L298N DC Motor Driver Board PWM Speed Dual H Bridge Stepper Module
> Features: 1.Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motors 2.Built-in TSD, without worrying about motor stall 3.Ultra-small size, suitable for assembly and carSpecification: 1.Module supply voltage: DC 2V-10V 2.Signal input voltage: DC 1.8-7V 3.Single working current: 1.5A 4.Peak current up to 2.5A 5...