Driver Module
>
Parameters:
Size: 18.5 x 16 mm
Input voltage: 3-10V
Single H bridge output current: 1.5A, can drive 2 deceleration motors.
Built-in overcurrent protection, short circuit protection, undervoltage latching and overheating protection. Sleep mode with low power consumption.
..
$19.99
Ex Tax:$19.99
>
Description:
1. onboard TJA1050 CAN controller interface chip
2. chip commonly used pin has led, convenient connection to use
3. pin 5 v to power supply
4. PCB board size: 22 (mm) x11.5 (mm)
Package included:
20 x TJA1050 CAN Controller Interface Module
,,,..
$24.99
Ex Tax:$24.99
>
Features:
A, B, C, D LEDs indicate the shape of the four-phase stepper motor
It is equipped with a standard interface for stepper motors and can be inserted directly during use.
Dimensions: 31 × 35mm
Package Included:
20 x ULN2003 Driver Board..
$12.99
Ex Tax:$12.99
>
Feature:
Rated Voltage: DC5V-12V
4-phase
Reduction Ratio: 1/64
Step Torque Angle: 5.625°/64
DC Resistance: 200ω±7% (25°)
Insulation Resistance: >10Mω (500V)
Insulation Grade: A
No-load Pull in Frequency: >600Hz
No-load Pull out Frequency: >1000Hz
Pull in T..
$14.99
Ex Tax:$14.99
>
Description:
ULN2003 is a high voltage and high current Darlington transistor array products with high current gain, high operating voltage, wide temperature range, with strong load capacity and other characteristics, adapted to the requirements of various types of the high-speed hi..
$15.99
Ex Tax:$15.99
Voltage: 5V(USB)
Precise details>>
Precise details:
Update information: The capacitor is replaced with a chip capacitor.
Feature:
DC5V power supply can be used.
Package includes:
20 x ..
$38.99
Ex Tax:$38.99
>
28YBJ-48 DC 5V 4 Phase 5 Wire Stepper Motor With ULN2003 Driver BoardDescription:
This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board
5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct pl..
$3.99
Ex Tax:$3.99
>
2Pcs L298N Dual H-Bridge Stepper Motor Driver Board For Description:Double H bridge drive Chip: L298N (ST NEW) Logical voltage: 5V Drive voltage: 5V-35V Logical current: 0mA-36mA Drive current: 2A (MAX single bridge) Storage temperature: -20 to +135 Max power: 25W Weight: 30g Size: 43..
$9.44
Ex Tax:$9.44
>
Description:
There are two L9110S motor control chip onboard
This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motorFeature:
Work under low static current
Power supply voltage: DC 2.5V - 12V
Each channel has 800mA continuous current output
Low saturation pr..
$7.99
Ex Tax:$7.99
Voltage: 5V(USB)
Precise details>>
Precise details:
Update information: The capacitor is replaced with a chip capacitor.
Feature:
DC5V power supply can be used.
Package includes:
2 x B..
$8.99
Ex Tax:$8.99
>
Features:
- Operating voltage is 12V
- One of our FBTS is equivalent to more than 6-8 black and white FBTS.
- High voltage output 30000Vv, with overcurrent protection.
- Feed protection is lower than 8.5v to stop high voltage oscillation.
- Support full stop control signal.
- With working ..
$16.99
Ex Tax:$16.99
Specifications:
Main Controller IC : IS917
USB type: USB3.0
PCB size:14*33mm(without the USB port size)
Support IC: BGA152/132/136 TOP48 (two solder chips,every chips need 2CE.But if you weld one chip in PCB,MAX 4CE)
Usage:（USB3.0 interface High speed）
NAND flash R/W Strick..
$109.20
Ex Tax:$109.20