Driver Module
Specifications:
Main Controller IC : IS917
USB type: USB3.0
PCB size:14*33mm(without the USB port size)
Support IC: BGA152/132/136 TOP48 (two solder chips,every chips need 2CE.But if you weld one chip in PCB,MAX 4CE)
Usage:（USB3.0 interface High speed）
NAND flash R/W Strick..
$12.71
Ex Tax:$12.71
>
Specification:
Input Vol:: 10.8-28V
Output Vol:: 15-88v
size: 8.5x4.5CM
1.VCC: power supply and voltage positive, circuit voltage (The voltage is usually 12V or 24V)
2.ON / OFF, ON, EN, ON_BL etc: switch foot, foot switch signal (The voltage range is between 2.5V-5V..
$10.99
Ex Tax:$10.99
>
Description:
EG8010 is a digital, function very well bring their own dead-time control of pure sine wave inverter generator chip, used in two-stage DC-DC-AC power conversion structure or single-stage DC-AC power frequency transformer Boost architecture, an external 12MHz crystal osci..
$25.99
Ex Tax:$25.99
>
Specicications:
Input voltage: 3 - 10V
Size: 18.5*16mm
Single H bridge output current: 1.5A, can drive 2 DC geared motors.
Built-in overcurrent protection, short circuit protection, undervoltage lockout and overtemperature protection. With low power sleep mode.
Uses: It ca..
$9.99
Ex Tax:$9.99
>
Description:
1. DC Motor Speed Controller,The full
name of pulse width modulation is Pulse Width Modulator.Abbreviation
PWM.DC motor governor is a device for adjusting the speed of a DC motor.
2. DC motor speed regulation, industrial
conveyor belt speed regulation, lighting an..
$16.99
Ex Tax:$16.99
>
Specifications:
Current: 700mA
Voltage input: 12V DC
Voltage output: 1.7-12V DC
Size: 38MM * 38MM
Potential: good night vision effect; rigorous design, stable performance and strong anti-interference.
Use: Suitable for all kinds of infrared lamp board drive, suitable for 1-6 infrared lamp
F..
$8.99
Ex Tax:$8.99
>
Description:
The four channel L298N motor drive module integrates two L298N chips and can drive four DC motors to realize the control of forward and backward rotation and motor speed. The module is equipped with LM2596S step-down chip. If the motor with 7V voltage or more is driven,..
$22.99
Ex Tax:$22.99
>
Introduction:
Two the L9110S motor control chip Onboard
The module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor
The module input voltage: 2.5-12V
The 800mA continuous current output capability per channel
Feature:
1. Low static work..
$7.99
Ex Tax:$7.99
>
Specifications:
Working voltage : DC 2.8-6V
Output Current: 31-1500mA
Maximum output power: 9W
Can drive 1-16pcs 2.8-6V LEDs (maximum current does not exceed 1.5A)
Perfect for 3V 3.3V 3.7V 5V 6V LED Driver)
Current regulation: 1 through adjustable resist..
$10.99
Ex Tax:$10.99
>
Specifications:
Input voltage: AC110/220V
Output voltage: DC12-17V
Output current: 200-300mA(adjustable)
Product size: 55*29*21mm
Working temperature: Ta: 50 TC: 75
Efficiency: ≥90%
Power factor: 0.9
Product application: spotlight PAR light / bulb light / candl..
$4.97
Ex Tax:$4.97
>
Parameters:
The drive module launched H-bridge DC motor driver chip LM18200T composition dedicated full H-bridge driver module, with a strong drive and braking effect, the maximum current is 3A!
Size: 31.5mm x 37.5mm
The main chip: LMD18200
Operating voltage: Control signal D..
$25.64
Ex Tax:$25.64
>
Feature:
Working voltage: DC5V-36V
Trigger signal source: digital high level (DC3.3V-20V), can be connected to the microcontroller IO port, PLC interface, DC power supply, etc., can connect PWM signal, support signal frequency 0-20khz
Output: DC5V-36V, continuous current at room..
$5.99
Ex Tax:$5.99