Driver Module
>
Features:
I2C interface
Power supply voltage: VM=15V max
Output current: Iout=1.2A(average) / 3.2A (peak)
Standby control to save power
CW/CCW/short brake/stop motor control modesPins Description:
VM: Motor power supply + (Max 15Vdc)
GND: Motor power supply -
A1 A2: Motor A
..
$13.99
Ex Tax:$13.99
>
Features: This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers Terminal block for power input (or you can use the 0.1" breakouts on the side) Reverse polarity protection on the terminal block input Green power-good LED 3 pin connectors in groups of 4 so y..
$14.99
Ex Tax:$14.99
>
Specification:Size: 75 x 50 x 35mm / 2.95 x 1.96 x 1.37inch (L x W x H)Rated maximum output: ± 3A, peak 3.5AWorking voltage: DC 10V-35VRecommended to use a switching power supply: DC24V power supplySubdivision: whole step, half-step, step 1/8, 1/16 step, a maximum of 16 Subdivisions.Featur..
$19.99
Ex Tax:$19.99
>
Specifications:ULN2003A motor driver chipChip all the pins already leads for easy connection to use5-12V power supply4-way signal indicatorXH-5P socket, can be connected directly 28BYJ-48 Model stepper motorPCB board size: 40.5 x 21.3 mmPackage includes:3 x ULN2003 Stepper Motor Driver Board..
$7.99
Ex Tax:$7.99
>
Feature:
Rated Voltage: DC5V-12V
4-phase
Reduction Ratio: 1/64
Step Torque Angle: 5.625°/64
DC Resistance: 200ω±7% (25°)
Insulation Resistance: >10Mω (500V)
Insulation Grade: A
No-load Pull in Frequency: >600Hz
No-load Pull out Frequency: >1000Hz
Pull in T..
$5.99
Ex Tax:$5.99
Voltage: 5V(USB)
Precise details>>
Precise details:
Update information: The capacitor is replaced with a chip capacitor.
Feature:
DC5V power supply can be used.
Package includes:
3 x B..
$10.99
Ex Tax:$10.99
>
Feature:
Product Name: Water Level Controller
Product model: XH-M203
Working voltage: AC/DC 12V
Output capacity: 10A
Output type: relay output
Control type: fully automatic
Product size: 60 x 40 x 18mm
Mounting hole: M3 screw holePackage includes:
3 x Water Level Contr..
$16.99
Ex Tax:$16.99
Feature:
The motor shields provide a convenient way of powering your OpenMV Cam and controlling low-power motors in one package. It features a 5V linear regulator to power your OpenMV Cam from a battery along with a motor driver chip to power two less than 2A low-power motors from the same battery..
$23.00
Ex Tax:$23.00
>
Data:
1. Voltage: 4V-12V (over voltage will burn)
2. Support one-key switch
3. Support automatic shutdown (will automatically shut down when not in use)
4. Support pulse time adjustment (a total of four adjustable)
Note:
1. This type requires self-welding wire and spot welding needle.
2. ..
$40.99
Ex Tax:$40.99
Brand:Renhotec
Price Tag: US$ 15.99 - US$ 30.99
Voltage: 24V,28V,42V,48V
Precise details>>
Precise details:
Features:
1. Step & direction or CW/CC..
$17.49
Ex Tax:$17.49
>
Description:
This drive module performs much better than MC33886 or L298 motor drive module. T
his drive module performs very well in terms of motor start speed and power efficiency. It can withstand high current overload.
This drive has a brake function, which can quickly stop the motor. ..
$30.99
Ex Tax:$30.99
>
Specifications:
Current: 700mA
Voltage input: 12V DC
Voltage output: 1.7-12V DC
Size: 38MM * 38MM
Potential: good night vision effect; rigorous design, stable performance and strong anti-interference.
Use: Suitable for all kinds of infrared lamp board drive, suitable for 1-6 infrared lamp
F..
$69.99
Ex Tax:$69.99