1. Mainly used in some 220V 110V electronic products, such as 220V electric furnace wire thermostat, incandescent bulb dimming, 220V fan, 110V electric drill marble speed control and so on.
2. SCR to increase the RC absorpt..
Mini wide voltage DC motor governor, using the latest low voltage drive technology, suitable for voltage wide DC5-35V (5-9V input needs to be shorted), with self-recovery fuse, also suitable for LED dimming.
Voltage range: DC10V-40V
For current: Rated current 10A, maximum current 15A
Speed range: 0-100%
PWM frequency: 21kHz
Potentiometer: Resistance B100K, line length 40cm, 8mm holeAttention:Suit for 1..
1. Connect the motor, the motor wire can be positive or negative.
2. Adjust the switch, the forward and reverse switch is used to control the direction of the motor speed. When the switch is at the zero position, the motor s..
Input voltage: DC9-55V
Output voltage: linear under load
Output limit current: 40A (20A for long time, pay attention to keep the module cool and cool)
Speed control type: flow adjustment
1. It is suitable for driving stepper motors of 8V~35V 2A or less
2. Only simple step and direction control interface
3. Five different stepping modes: full, half, 1/4, 1/8 and 1/16
4. The adjustable potentio..
1. Onboard Two PCS HG7881 motor controller chip
2. Can drive 2 DC motors simultaneously, or one 4-wire 2-phase stepping motor
3. Input voltage: 2.5-12V
4. Has a continuous current of 800mA per channel output ..