Motor PWM Speed Controller
Brand:Renhotec
Precise details>>
Precise details:
Feature:
1. It is suitable for driving stepper motors of 8V~35V 2A or less
2. Only simple step and direction control interface
3. F..
$4.99
Ex Tax:$4.99
Voltage: AC 220V
Precise details>>
Precise details:
Features:
- This item has new two-way large power silicon controlled rectifier and the current can be up to 80A, which is a goo..
$13.99
Ex Tax:$13.99
Power: 4000W
Precise details>>
Precise details:
Features:
This controller uses novel bi-directional high-power SCR.
It can be very convenient adjust the current up to 25A, and solve the ov..
$9.99
Ex Tax:$9.99
Content-Length: 1853
>
Specifications:
Input voltage: AC 220V
Output voltage: linear under load
Continuous current: 10A
Maximum current: 20A
Regulated voltage: DC 10-210V
Speed regulation method: potentiometer (linear)
Wiring type: Barrier termin..
$7.99
Ex Tax:$7.99
Content-Length: 3197
>
Note:
This drive is a DC three-phase brushless Hallless control board. The motor can work normally without Hall.
BLDC wide voltage 5-36V high power 350W DC three-phase brushless non-inductive controller
M..
$15.11
Ex Tax:$15.11
Content-Length: 2441
>
Features:
• CCM5D DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).
• Large 0.56 inch 3-digit LED display numbers allow viewing under the most adverse conditions.
• The d..
$9.99
Ex Tax:$9.99
Content-Length: 2127
>
Features:
The maximum power design of the governor is 10A. It is not vacant. Under normal working conditions, it can work long hours in a well-ventilated environment.
High-performance governor, no whistle whistle, wit..
$9.99
Ex Tax:$9.99
Content-Length: 1905
>
Specification:
Model: CCM6C
Input voltage: 6V/12V /24V DC
Control Power: 24V-within 200W; 12V-within 120W; 6V- within 60W
Current: Sustained current maximum 20A, suggest use within 10A
PWM Duty Cycle:5% -100%..
$8.99
Ex Tax:$8.99
Content-Length: 2441
>
Feature:
1. Applicable to all versions of mach3 software;
2. The power of control card: voltage 12-24VDC, current more than 500MA.
3. Support for CNC controlled 5-Axis can connect five stepper motor drivers or se..
$33.99
Ex Tax:$33.99
Voltage: DC5V
Precise details>>
Precise details:
Feature:
The input power range is DC 1.8-15V .
Use a 2A resettable fuse to protect the controller.
Potentiometer with switc..
$6.99
Ex Tax:$6.99
>
Features:
With forward, reverse bidirectional toggle switch.
The motor speed controller makes it possible to control the speed of the motor and the direction of rotation.
Speed type: flow control
Input voltage: DC10-55V
Power(Max): 300W
Continuous current: 60A
Maximum current: 100A
Control ..
$15.99
Ex Tax:$15.99
Voltage: 28V,48V,DC 12V,DC 24V
Precise details>>
Precise details:
Feature:
- Soft start: Can solve the damage caused by instantaneous high current to speed controller
- Blocking protectio..
$8.49
Ex Tax:$8.49