ZVS Heating Module

Grid View:
Quickview

1000W 20A ZVS Induction Heating Machine Cooling Fan PCB Copper Tube 12-36V

$43.99

Voltage: 24V Precise details>> Precise details: If you want to buy the 2500W 50A ZVS Induction Heating Module, >>>Click hereClick here..

Quickview

1000W 20A ZVS Induction Heating Machine with Cooling Fan Copper Tube DC12-36V Heater Module

$51.99

Description:  This heating module uses a layout design that ensures good heat dissipation and high power. There is a built-in cooling fan. It can work for DIY players and meet the need for small parts quenching, annealing, and other heat treatment. It can also be used with a graphite crucible to smelt gold, silver, copper, aluminum and other metals..

Quickview

1000W 20A ZVS Low Voltage Induction Heating Coil Module Flyback Driver Heater

$13.99

Specification:   Size: approx. 85 x 69 x 30mm Maximum current: 20A Maximum power: 1000W 24V input with no load current of 3A 48V input with no load current of 6A   Feature:   This section of induction heating using low-voltage DC power supply 12-48V. Tested 53V power supply when working properly. The higher the voltage, the greater the heating curr..

Quickview

10pcs 36V Coil Module High Power Generator Of High Voltage with Commonly Used Coil Motherboard

$58.99

> Specifications:   Type: Logic ICs Supply Voltage: 36V Size: 2.3 x 4.2cm(0.91 x 1.65in)   Warning Tips:   1. Professional operation is needed. Anyone without experience should take full consideration before place an order. All consequances after inappropriate operation are at buyers' peril. 2. Do not put the weld..

Quickview

12-24VDC ZVS High Voltage Power Module Coil Zero Voltage Switching For SGTC Student Experiment

$26.99

Feature:   When using 12-24V DC input, the supply current is required to be no less than 4A at 12V and not less than 8A at 24V. It can be powered by switching power supply, battery or lithium battery pack, or it can be rectified and filtered by high-power transformer. The filter capacitor is not less than 10000uF. Input voltage Output v..

Quickview

2000W ZVS Induction Heating Module Board Flyback Driver Heater Good Heat Dissipation With Coil Pump Power Adapter Kit

$99.99

> Note:   This Induction Heater need 2000W power supply or DC welding machine power supply to Heating material. Please installed the copper coil and water pump, then connect the power supply. (can not empty load)   Feature:   Only iron can be heated directly. Other metal materials need graphite crucible. Input voltage: DC..

Quickview

20A ZVS Induction Heating Board Flyback Driver Heater With Ignition Coil

$47.99

If you need power supply, please buy it separately: Product ID: 1196806Features:Working voltage: DC 24-36VWorking current: more than 15A, less than 30APower tube: Original IRFP260N (50A 200V)Size: 100 x 100 x 85mmSpiral copper pipe size: Inside diameter 40 mm, high 45mmFound with a 36V power supply completely into the new 30 * 30 graphite crucible ..

Quickview

2500W 48V 50A ZVS Induction Heating Module High Frequency Heating Machine Melt Metal Coil With Power Supply Full Kit

$234.99

Voltage: 48V Precise details>> Precise details: Feature:   This induction heating circuit uses a 12-48V low-voltage DC power supply with a maximum current of 50A and a maximum power of 2500W. Continuous operation under conditions of good heat diss..

Quickview

2500W 50A ZVS Induction Heating Module High Frequency Heating Machine Melt Metal + 48V Coil

$112.99

Current: 50A Precise details>> Precise details: If you want to buy 1000W 20A ZVS Induction Heating Machine: >>>Click here>>Click here..

Quickview

2500W 50A ZVS Induction Heating Module High Frequency Heating Machine Melted Metal Heater + 48V Coil

$131.99

Introduction:   This version is a 2500W upgrade of the 1800W ZVS heating module, using an oversized PCB layout design and an oversized heat sink for heat dissipation. Good power, self-contained cooling fan interface, can also do Tesla discharge, mark generator, high voltage inverter power supply, etc. This product can work continuously for several ..

Quickview

2500W 50A ZVS Induction Heating Module High Frequency Heating Machine Melted Metal With 48V Coil

$85.11

Introduction:   This version is a 2500W upgrade of the 1800W ZVS heating module, using an oversized PCB layout design and an oversized heat sink for heat dissipation. Good power, self-contained cooling fan interface, can also do Tesla discharge, mark generator, high voltage inverter power supply, etc. This product can work continuously for several ..

Quickview

2500W 50A ZVS Induction Heating Module High Frequency Heating Machine Metal Heater + 48V Coil

$86.21

> Introduction:   This version is a 2500W upgrade of the 1800W ZVS heating module, using an oversized PCB layout design and an oversized heat sink for heat dissipation. Good power, self-contained cooling fan interface, can also do Tesla discharge, mark generator, high voltage inverter power supply, etc. This product can work contin..

Quickview

3Pcs 5V -12V ZVS Induction Heating Power Supply Module With Coil

$27.99

> Features:   Input voltage: 5v-12v Module dimensions: 5.5 x 4 x 2 cm(L*W*H) Coil size:  length:7.5cm                width: 2.8cm   Package Included:   3 x induction heating power supply module 3 x coil  ..

Quickview

4000W 85A ZVS High Frequency Induction Heating Board Machine with Heating Coil Water Pump 70ml Crucible

$243.00

Product features and functions:1. Use 2mm thickness PCB design, copper thickness 2OZ, large current, good heat dissipation;2. 180mm 220V cooling fan;3. The heating coil is wrapped with high-temperature insulation material to prevent short circuit during heating, and a specific heating coil is customized;4. The input terminal uses high-current power..

Quickview

5pcs 36V Coil Module High Power Generator Of High Voltage with Commonly Used Coil Motherboard

$31.99

> Specifications:   Type: Logic ICs Supply Voltage: 36V Size: 2.3 x 4.2cm(0.91 x 1.65in)   Warning Tips:   1. Professional operation is needed. Anyone without experience should take full consideration before place an order. All consequances after inappropriate operation are at buyers' peril. 2. Do not put the weld..

Showing 1 to 15 of 26 (2 Pages)