Features: Can be used to test LED Strip,lamp,LED panel,backlight,etc. Can test any size LED backlight and lamp bead You can judge whether the backlight is good or bad without disassembling the screen. Automatic detection of output voltage and current (Not Burn Out: voltage auto-change, Curren..
Features: 1.Manual stepless pre-conditioned open-circuit voltage (20-330VDC). When testing, intelligent fully adaptable to the LED voltage light source, and no need to adjust! 2. When the output voltage is pre-set to 20V or lower, use 1mA of the transfer current to check if the IC is turned off, v..
Features: -Can be verified part of the circuit Ohm's law. -Used as an additional resistor to expand the range of volts. -Used to measure unknown resistance. -Used as electromotive force and internal resistance for measuring -power supply. -Used as a known resistor in the circuit t..
Features:Backlight control, you can turn off or turn on the backlight by short pressing the buttonSeparate wiring terminals independently, simple wiring, no mutual interferenceNo screw elastic connection, tightly pressed, no damage to the LCDStrong and weak current circuit board, strong anti-interfe..
If you need only the CT, please check this: >>>Here Many buyers are response: Why test data is wrong? Voltage * Current = Power, But power is less than the actual test voltage * Current, Why is that? Answer: There are three types of power: Active P..
Key-button Instruction: ● Short press button to switch the backlight on and off. ● Press and hold for 3 seconds to enter the overload power setting. -- Enter the overload power setting, default value is 4.4KW. -- The highest bit flash, Short press the key corresponding to the value p..
Features: PMMA/ABS plastic shell, B plate dial for PC material default is yellow or black & red letter (large amount can be customized according to customers demand), A (VU meter) for aluminum plate default black, aluminum needle painted red, stable support never demagnetization, high precision..
Features: Clear plastic shell, easy to read scale. Complete with screws for simple DIY installation. Using in the ancillary panel of the low- and high-tension switch board, power cabinet, and controlling house of the transmission and supply systems for DC power, and diverse electric control g..
Features: 1) 8192 pixels HD display. 2) D+ D- Voltage Tester. 3) Memory power time data such as power. 4) The single monitoring shows charging voltage, current, power, power WH,mAH, charging time and other information. 5) USB is the copper pin and a low resistance in sampling technology, acce..
Features:- High quality industrial absorbing materials. High sensitivity and robust sensor probe. Bright LED spotlight- To the signal density (low, medium, high), the beeper sounds at different frequencies to- To improve the quality of life. The problem of electricians is no longer a problem.- Appli..