As a senior buyer, I believe everyone should know that there are many different types of connectors in the connector industry. Among them, there are three types of connectors according to the properties of the two ends of the connector: basic types That is, wire-to-wire, wire-to-board and board-to-board. The following is an introduction to the wire-to-wire connector in the connector.


　　What is the meaning of the wire-to-wire connector?

　　The wire-to-wire connector includes a wire-to-cable or a cable-to-cable form, and its defining feature is that two single-wire individuals or corresponding wires in two cables are permanently connected to each other. These permanent connections are more common in fixed connections, line-to-line connections and IDC connections.

　　The wire-to-wire connector family includes rectangular, circular, soft-shell, ultra-small-D and ribbon connectors. Coaxial connectors also belong to this series, but their design features for high-frequency use will be discussed later.

　　What are the characteristics of wire-to-wire connectors?

　　The wire-to-wire connector is T6 heat-treated, and the appearance is treated with stainless steel shot sandblasting. It has the characteristics of good air tightness and beautiful appearance. It is easy to operate and install, and it is convenient to achieve the effect of never letting off the odor. It saves the old-fashioned ground and underground storage. Trivial installation, maintenance and connection of water bends. The wire-to-wire connector family includes rectangular, circular, and wire-to-wire connectors. The market prospects for ultra-small-D and ribbon connectors. Coaxial connectors also belong to this series, but their design features for high-frequency use will be discussed later.


　　What are the applications of wire-to-wire connectors?

　　In some applications of wire-to-wire connectors, the voltage and current in electrical systems are relatively high, and the requirements for connector performance under high voltage and high current environments are also more stringent. The voltage resistance and current carrying capacity of the connector must be renewed. Only by pulling up high can safety and reliability be ensured.

　　How to understand the rated voltage of the wire-to-wire connector?

　　The electrical parameters of wire-to-wire connectors include rated voltage, rated current, contact resistance, withstand voltage, insulation resistance, etc. How do you understand the rated voltage of the connector? The rated voltage is also called the working voltage, which mainly depends on the insulating material used in the connector and the distance between the contact pairs.

　　Some components or devices may not be able to perform their due functions when the voltage is lower than their rated voltage.


　　The rated voltage of the connector should in fact be understood as the highest operating voltage recommended by the manufacturer. The manufacturer will specify the highest operating voltage that the connector can withstand in the product manual or corporate standard, that is, the rated voltage. Generally, it is required to be applied to the connector during actual work. The voltage on the connector is lower than the rated voltage of the connector. The editor of REHOTEIC recommends that the rated voltage be selected reasonably according to the withstand voltage (electric strength) index of the electrical connector and the use environment and safety level requirements. If the withstand voltage index is the same, the use environment Different, the requirements for the highest working voltage should also be different to choose the most suitable connector. Go to our store and have a look, hoping to choose the product you like. If you have any questions, you can consult online.