150W DC 12V-24V Mini Wood Lathe Bead Cutting Drill Polishing DIY Woodworking Machine Set
150W DC 12V-24V Mini Wood Lathe Bead Cutting Drill Polishing DIY Woodworking Machine Set
Specifications: Name:150W Mini Lathe Beads Machine Main material: All steel Color: Blue Voltage Input: AC 230V 50/60Hz Voltage Output: DC 12-24V Rated power: 150W Rated speed: 4000-7000RPM Power: 7 level of adjustable speed Max Processing length: 145mm / 5.7in Max Processing diameter: 50mm / 2.0in Chuck clamping r-ange: 0.6-6.5mm / 0.02-0.26in Swing diameter: max 50mm / 2.0in Grip length: max 140mm / 5.51in Matching saw b-lade diameter: max 50mm / 2.0in Machine size: 345*60*80mm / 13.6* 2.36 * 3.15in
Features: 1 Shield design, super convection cooling holes for better heat dissipation 2 high quality all steel thick material board 3 full shrink tube joints bonding wire wrap 4 super large torque 150w bearing motor 5 Pure steel structure drill chuck for more precise operation 6 Super large torque ball bearing motor, maximum rotating speed up to 7000RPM
Note: 1. If the user does not have lathe base experience, when using, uses should follow: low speed, slowly, cautiously and use other security operations. 2. The speed can be adjusted in 4000-7000RPM, speed of cutting wood should not exceed 5000, grinding can use higher speed. 3. Drill chuck a-xis, the a-xis of the wood, the tailstock center a-xis of the drill should be in a straight line, or need to adjust the nut. 4. If not a cylinder, the speed should be reduced. 5. Tailstock bearing without lock tight. 6. When using a kn-ife, locking the bottom of screw, location should be away from timber 1-1.5cm.
Package lncluded: 1 x Mini Lathe Beads Machine 1 x Speed Control Power Supply (12-24V) 1 x Fine copper carving kn-ife 1 x Thread fixed needle 3 x Beads fixed needle (1.5/2.0/2.5mm) 1 x Hex shank wrench 1 x Collet Wrench 1 x M-etal saw table top 30 x Steel sanding needle 1 x High speed steel saw blade 1 x Emery saw blade 6 x Matte paper 1 x Sanding disc 1 x Flexible shaft 4 x Drill bit 5 x Sandpaper ring 3 x Wire brush 3 x Bu-ddha beads head