SIM7600G-H 4G/3G/2G/GSM/GPRS/GNSS HAT Communication Expansion Board GNSS Positioning For Jetson Nano/STM32 the Global Version
SIM7600G-H 4G/3G/2G/GSM/GPRS/GNSS HAT Communication Expansion Board GNSS Positioning For Jetson Nano/STM32 the Global Version
Overview:
The SIM7600G-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Features:
Standard 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
Supports GPS, BeiDou, Glonass, LBS base station positioning
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Onboard CP2102 USB to UART converter, for serial debugging
UART control pins, to connect with host boards like Arduino/STM32
SIM card slot, supports 1.8V/3V SIM card
TF card slot for storing data like files, messages, etc.
Onboard audio jack and audio decoder for making telephone call
2x LED indicators, easy to monitor the working status
Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
Baudrate: 300bps ~ 4Mbps (default: 115200bps)
Autobauding baudrate: 9600bps ~ 115200bps
Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Communications Specifications:
| LTE | WCDMA / TD-SCDMA / CDMA 2000 | EDGE | GSM/GPRS | |
| Band | SIM7600A-H: | SIM7600A-H: | Not available | |
| LTE-FDD B2/B4/B12 | UMTS/HSPA+ B2/B5 | |||
| SIM7600E-H: | SIM7600E-H: | GSM/GPRS/EDGE 900/1800 MHz | ||
| LTE-FDD B1/B3/B5/B7/B8/B20 | UMTS/HSPA+ B1/B5/B8 | |||
| LTE-TDD B38/B40/B41 | ||||
| SIM7600CE-T: | SIM7600CE-T: | |||
| LTE-TDD B38/B39/B40/B41 | UMTS/HSDPA/HSPA+ B1/B8 | |||
| LTE-FDD B1/B3/B8 | TD-SCDMA B34/B39 | |||
| CDMA 1X/EVDO BC0 | ||||
| SIM7600G-H: | SIM7600G-H: | SIM7600G-H: | ||
| LTE-TDD B34/B38/B39/B40/B41 | UMTS/HSDPA/HSPA+ B1/B2/B4/B5/B6/B8/B19 | GSM/GPRS/EDGE 850/900/1800/1900MH | ||
| LTE-FDD B1/B2/B3/B4/B5/B7/B8 | ||||
| /B12/B13/B18/B19/B20/B25/B26/B28/B66 | ||||
| Generation | 4G | 3G | 2.5G | 2G |
| Emitting power | 0.25W | 0.5W@EGSM900 | 2W@GSM900 | |
| 0.4W@DCS1800 | 1W@DCS1800 | |||
| Data Speed | LTE CAT 4 | UMTS | EDGE | GPRS |
| Uplink≤50 Mbps | Uplink≤384Kbps | Uplink≤236.8kbps | Uplink≤85.6kbps | |
| Downlink≤150 Mbps | Downlink≤384Kbps | Downlink≤236.8kbps | Downlink≤85.6kbps | |
| HSPA+ | ||||
| Uplink≤5.76Mbps | ||||
| Downlink≤42Mbps | ||||
| SIM Card | Normal SIM (Not Included) | |||
GNSS Specifications:
Receiver type
16-channel
C/A code
Sensitivity
Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)
Cold starts: -148 dBm
Time-To-First-Fix (open air)
Cold starts: <35s
Hot starts: <1s
Accuracy
Position: <2.5m CEP
SMS and Audio Specifications:
SMS
Supported types: MT, MO, CB, Text, PDU
Storage: USIM card and ME (default)
Audio feature
Supports echo cancellation
Supports noise reduction
Other Specifications:
Power supply: 5V
Operating voltage: 5V/3.3V (configured via jumper)
Operating temperature: -30°C ~ 80°C
Storage temperature: -45°C ~ 90°C
Dimension: 56.21mm x 65.15mm
Package includes:
1 x SIM7600G-H 4G HAT
1 x LTE antenna
1 x GPS External Antenna (B)
2 x USB cable type A male port to micro male port
1 x RPi copper pillar package (2PCS set)
What's on Board:
1. SIM7600G-H
2. CP2102 USB to UART converter
3. NAU8810 audio decoder
4. TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V
5. MP2128DT power chip
6. MP1482 power chip
7. Raspberry Pi GPIO header: for connecting with Raspberry Pi
8. SIM7600 control interface: for connecting with host boards like
Arduino/STM32
9. SIM card slot: supports 1.8V/3V SIM card
10. TF card slot: allows file/SMS/... storage
11. 3.5mm earphone/mic jack
12. USB interface: for testing AT Commands, getting GPS positioning data, etc.
13. USB to UART interface: for serial debugging, or login to Raspberry Pi
14. MAIN antenna connector
15. AUX antenna connector
16. GNSS antenna connector
17. Power switch
18. Network status indicator
19. Power indicator
20. Operating voltage selection jumper:
VCCIO - 3.3V: set operating voltage as 3.3V
VCCIO - 5V: set operating voltage as 5V
21. UART selection jumper:
A: access Raspberry Pi via USB to UART
B: control the SIM7600 by Raspberry Pi
C: control the SIM7600 via USB to UART
- Stock: In Stock
- SKU: EB001502
$72.99
Ex Tax: $72.99