125Khz EM ID Metal Case Gate Opener Door Lock RFID Reader Access Control Keypad with Back Light
125Khz EM ID Metal Case Gate Opener Door Lock RFID Reader Access Control Keypad with Back Light
Features :
Strong Zinc Alloy Electroplated anti-vandal case
Full programming from the keypad
2000 uses, supports Card, PIN, Card + PIN
Can be used as a standalone keypad
Backlight keys
Wiegand26 input for connection to external reader
Wiegand26 output for connection to a controller
Adjustable Door Output time, Alarm time, Door Open time
Very low power consumption (30mA)
Fast operating speed, <20ms with 2000 users
Lock output current short circuit protection
Easy to install and program Built in light dependent resistor (LDR) for anti tamper
Built in buzzer
Specification :
| Operating Voltage | DC 12V±10% | Lock Output Load | Max 3A | |
| User Capacity | 2000 | Alarm Output Load | Max 20A | |
| Card Reading Distance | 5-6 cm | Operating Temperature | -40~60 Degree | |
| Active Current | <60mA | Operating Humidity | 10%-90%RH | |
| Idle Current | 25±5 mA | Size | 120x76x20MM | |
| Adjustable Door Relay time | 0 -99 seconds | |||
| Adjustable Alarm Time | 0- 3 minutes | |||
| Wiegand Interface | Wiegand 26 bit | |||
| Wiring Connections | Electric Lock, Exit Button, External Alarm, External reader | |||
Quick Reference Programming Guide:
| To enter the programming mode | * Mas ter code # 999999 is the default factory mas ter code |
| To exit from the programming mode | * |
| Note that to undertake the following programming the mas ter user must be logged in | |
| To change the mas ter code | 0 New code # New code # The mas ter code can be 6 to 8 digits |
| To add a PIN user. | 1 User ID number # PIN # The ID number is any number between 1 & 2000. The PIN is any four digits between 0000 & 9999 with the exception of 1234 which is reserved. Users can be added continuously without exiting programming mode |
| To add a card user | 1 Read Card # Cards can be added continuously without exiting programming mode |
| To delete a PIN or a card user. | 2 User ID number # for a PIN user or 2 Read Card # for a card user Users can be deleted continuously without exiting programming mode |
| To unlock the door for a PIN user | Enter the PIN then press # |
| To unlock the door for a card user | Present the card |
Package includeds :
1 x Access Control Keypad
Details pictures :
- Stock: In Stock
- SKU: EB0025495
$25.99
Ex Tax: $25.99