2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module

2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
2.4G Wireless Module XH-NF-01 Built-in Antenna 100mW Power SPI Interface Internet Module
Features:

XH-NF-01 is a 100 mW power 2.4G wireless module, high airspeed (up to 2 Mbps), using SPI interface, transceiver and receiver integrated hardware module; high stability, high-cost performance, good spectrum testing characteristics, small size, using all-industry-class components.
XH-NF-01 can be widely used in various occasions of the Internet of Things, such as a wireless key mouse, wireless remote control, somatosensory devices, active RFID, NFC, low-power wireless sensor network nodes in ad hoc networks, etc. It is an ideal solution for the application of the Internet of Things.
XH-NF-01 is packaged in DIP-8. Whether it is learning or mass production, XH-NF-01 can be quickly connected to existing products without welding and directly plugged in. It is very convenient to use.
DIP-8 ultra-small size package, built-in 2.4G antenna, compact size, easy to use.
Supports six-channel data reception.
Support general modulation methods such as GFSK/FSK.
Support 2Mbps/1Mbps/250Kbps data rate.
With a four-wire SPI interface, the speed can reach 10MHz.
Internal Intelligent ARQ Baseband Protocol Engine.
Hardware interrupt output of receiving and receiving data.
Support 1-bit RSSI output.
 
 
Num. Pin Direction Function
1 VCC - The power supply must be between 2.0 - 3.6V
2 GND - The ground wire, connected to the power reference ground
3 CSN Input The chip select pin for starting an SPI communication
4 CE Input Control pin
5 MOSI Input SPI data input pin
6 SCK Input SPI bus clock
7 IRQ Output Interrupt signal output, active low
8 MISO Output SPI data output pin
 
Model XH-NF-01
Package DIP-8
Size 28.6*15.3*3.2 mm
Communication Interface SPI (up to 10Mbps)
Airspeed rate 250k~2Mbps 3 levels adjustable (250kbps, 1Mbps, 2Mbps)
Spectrum range 2400MHz~2525MHz adjustable, 1MHz stepping
Antenna form Onboard PCB antenna, gain 2dBi
Maximum transmit power 7dBm
Receiving sensitivity -96dBm@250kbps
Average current Emission current: 25mA (7dBm)
Receive current: 15mA (2Mbps)
Shutdown current 1.0uA (Shutdown mode)
Power supply range 2.0V~3.6V, typical value 3.3V
Operating temperature -20 ℃ ~ 85 ℃
Storage environment -20 ℃ ~ 90 ℃ , < 90%RH
 
Package included:

1 x 2.4G Wireless Module XH-NF-01


24G-Wireless-Module-XH-NF-01-Built-in-Antenna-100mW-Power-SPI-Interface-Internet-Module-1421724

24G-Wireless-Module-XH-NF-01-Built-in-Antenna-100mW-Power-SPI-Interface-Internet-Module-1421724
  • Stock: In Stock
  • SKU: EB000330
$1.76
Ex Tax: $1.76