10A Relay 12V 4CH Channel 433MHZ Wireless Remote Control Switch Receiver Board with Remote

Specifications:

Input Voltage: DC10-14V

Standby Current: <5MA

RF Frequency: 433MHZ

RF Working mode: Super heterodyne receiver

Receiver Sensitivity: >98dBm

Remote Control Distance: >100 meter(In open environment)

Decoding Way: MCU Software decoding

Can store the number of remote control: 50

Support remote control type: Fixed code, learning code

Channel: 4CH

Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)

Wiring Method: Fixed wiring terminal

Working Voltage: DC12V

Output Current: 10A

Output: Normally open,Common,Normally closed

Size: 50x70x25mm

How to use:

1. Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.

2. Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.

3. Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.

4. Delay: Press remote control 's one button,relay is working,release the remote control and begin timekeeping,after 5s/10s/15s will automatically close the relay

Learn:

1. Press the learning code .the indicator flash ,loosen your finger ,press any button of the remote control (press 1 times to learn Momentary; 2times-Toggle;3times-Latched;4times-5s delay;5times-10s delay;6times-15s delay)

the indicator flash 2 times and off .it mean you learn it successfully .

2. It can learn 2272 2262 or 1527 chip with the different code wireless 315MHz remote control

Remove/clean:

Press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully .

Package Included:

1 x 12V Wireless Relay Switch

1 x Remote